KANN

 KANN CURB MASTER 

Residential & Commercial 

Side Loaders

AUTOMATED 

SIDE LOADER

The KANN Automated Side Loader comes in six body sizes ranging from 18 to 32 cubic yards, with an arm reach of up to 102 inches, a loading cycle of less than 8 seconds and can pack up to a 1000 lbs/cu yd of commodity!  The KANN automated side loaders can be purchased as a tip-to-dump or as a full eject unit.

Photo Icon.JPG
Video Icon.JPG
rfq Icon.JPG
Questions Icon.JPG

AUTOMATED TWO COMPARTMENT

SIDE LOADER

The KANN Two Compartment Automated Side Loader comes in six body sizes ranging from 18 to 32 cubic yards, with an arm reach of up to 102 inches, a loading cycle of less than 8 seconds, has two independent separate compartments to eliminate cross contamination and is easily unloaded as a tip-to-dump unit.

Photo Icon.JPG
Video Icon.JPG
rfq Icon.JPG
Questions Icon.JPG

TRANSFORMER SIDE LOADER

(NO FET & NO CDL REQUIRED)

The Kann Curb Master Series TRANSFORMER Mini Side Loader comes standard as a dual manual side loader, but can easily be TRANSFORMED into a semi-automated or automated unit by adding cart tippers or an automated arm package to one or both sides.

Photo Icon.JPG
Video Icon.JPG
rfq Icon.JPG
Questions Icon.JPG
Snapshot - 142.jpg

COMMERCIAL

SIDE LOADER

The KANN Commercial Side Loader can be purchased in a square or (low profile) round top design, with tip-to-dump or full eject unloading, has a fast 10 to 12 second load cycle and can load and pack on the go with no wait loading.

Photo Icon.JPG
Video Icon.JPG
rfq Icon.JPG
Questions Icon.JPG
SLE.jpg

RESIDENTIAL

SIDE LOADER

The KANN residential side loader features semi-automated loading of loose, bagged or carted garbage, high compaction loads and full eject unloading. This unit is extremely versatile and saves hours compared to a rear loader on the same route.

Photo Icon.JPG
Video Icon.JPG
rfq Icon.JPG
Questions Icon.JPG
P0010711.jpg

BUCKET/TROUGH

SIDE LOADERS

The KANN Residential Bucket Side Loader is designed for collection of bag, bulk or carted residential solid waste using single or dual side loading buckets loaded into a single or two compartment body with full eject unloading.

IMG_1544.jpg

KANN MINI SIDE LOADER

(NO FET OR CDL REQUIRED)

The Kann Mini Side Loader can be loaded at the low frame height from either side of the truck.  The Kann Mini comes standard as a manual side loader, but can also be used as a semi-automated by adding cart tippers or can even be made into a mini automated side loader by adding a simple Kann automated arm package.

Photo Icon.JPG
Video Icon.JPG
rfq Icon.JPG
Questions Icon.JPG
SLEC-KA.JPG

KANN SIDE LOADER ATTACHMENTS

KANN ADAPTER - Commercial Rear       Loader Attachment

KANN GRABBER - Manual, Semi-         Automated or Automated                     Residential Attachment

MORE...